Digital TDS meter tester used for measuring Total Dissolved Solids present in the water. For measurement of TDS use the following instructions.
Operating Instructions:
Taking TDS Measurements Remove the protective cap. Turn the TDS meter on.
Immerse the meter into the water/solution up to the maximum immersion level (2 inch).
Lightly stir the meter to dislodge any air bubbles. Wait until the display stabilizes.
Once the reading stabilizes (approx. 10 seconds), press the HOLD button to view the reading out of the water.
If the meter displays a flashing x10 symbol, multiply the reading by 10.
Auto Off Function to Save Battery
After usage, shake off any excess water from your meter and close the cap.
Precautions:
The meter is not water-tight. Do not dip the meter beyond the water level limit.
Do not store the meter in high temperatures or direct sunlight.
Do not attempt to open the housing or tinker with the electronics of the unit.